The reverse osmosis method is a process for producing fresh water by supplying seawater to a semipermeable membrane at higher pressure than osmotic pressure. Unlike the evaporation method, it does not require steam and can produce fresh water with a high energy efficiency.
In the Middle East, where the cost for energy is relatively low, the evaporation method prevails. However, RO is now expanding its share of the worldwide market, helped along by improvements in technology and membrane performance. At present, more than one half of desalination plants use the reverse osmosis method.
We have been developing this process with its own technology since the 1970s and have many records of delivery to mainly isolated islands in Okinawa.
Recently, we have constructed a large RO plant in Qatar and the plant has produced approx. 270,000 m³ of water per day.

Our Australian subsidiary, Osmoflo is a global desalination and water treatment company. Located across Australia, the Middle East, Oman and India. Osmoflo offers international coverage of its world class capabilities in delivering water treatment solutions. Osmoflo has over 450 plants located around the world at remote mine sites, oil & gas fields, power stations, city breweries, townships and coal seam gas fields - wherever there's a need for drinking, process, high purity or recycled water.

The multi stage flash method is an evaporation process for desalination in which heated seawater is evaporated in a vacuum evaporator and the resulting vapor is condensed to produce fresh water. Recovery of the latent heat of condensed vapor increases the heat efficiency. In the Middle East most desalination plants are constructed with power generation facilities. Therefore many large MSF desalination plants are operated using the excess steam from the power generating facility. We have built 17 plants and 49 desalination units since 1978 (total water production: 1,664,997m³/day).

Multiple evaporators are connected, and the heat source of the first evaporator uses steam from power generation equipment, etc. However, the heat source after the second evaporator uses the steam generated in the previous evaporator. This steam generation process is repeated for the number of evaporators to efficiently produce fresh water. Depending on the shape of the heat transfer surface installed inside, the evaporators are largely divided into vertical tube evaporators (VTE), horizontal tube evaporators (HTE), and multi-effect evaporator plates (MEP).
In the 1960s, Kanadevia entered the water generation market through VTE multi-effect water generation equipment. Furthermore, we started development of a horizontal tube MED in 2001. After completing verification tests, we started operation of the first unit in July 2011.